What’s Included Battery Wi-Fi Cameras Battery Wi-Fi Rechargeable Batteries Camera(s) (Includes 2 per Camera) Mounting (1) USB-C Charging Hardware Kit Cable NOTE: If mounting the camera, you will need a screwdriver or drill (not included).
Page 3
Battery Wi-Fi Camera Details Lens MIcrophone microSD USB-C Port USB-C Port Card Cover Battery Housing Release Button Camera Bottom Camera Bottom (With Cover) (Without Cover)
Page 4
Download the Night Owl App If you are a first-time user, go ahead and down- load the Night Owl app. Quickly create an account and log in. Already have an account? Simply log in.
Page 5
Initial Start-up Steps Install the batteries. Press the button on the camera's belly to release the battery cartridge and insert the batteries. Replace the cartridge and connect the USB cable to the port under the rubber piece. Press Button Insert Batteries NOTE: Each camera requires 2 rechargeable batteries but can hold up to 4 batteries.
Page 6
Test by pressing the existing doorbell button. If the existing doorbell chime does not ring, your existing doorbell wiring may be defective. Initial Start-up Steps (Continued) Consult an electrician to repair the wiring. Charge the camera(s) for at least 3 hours. Lift the rubber piece on the camera's belly and connect the USB cable to the camera and a USB power supply.
Page 7
Connecting to a Wi-Fi Router Adding Your Camera Open the Night Owl Protect App. Tap on “Add New” or “+” Follow the on-screen instructions to complete the setup process. For iOS Tap “Add New.” For Android Tap “+” Android...
Page 8
Connecting to a Wi-Fi Router (Continued) Setup Using: QR Code (Recommended), Network Discovery, Manual by UID. Model: BWNIP-4TA-BS S/N: XXXX XXXX XXXX Once the QR Code is captured the App leads you through the rest of the process.
Page 9
Doorbell Installation (Continued) If setup is completed using Network Discovery or Manual setup by UID once your device is added to the network you will need to select the category of the device to proceed. Select “Standalone camera” from the device list NOTE: The Router’s security protocol MUST be set to WPA/WPA2 (strong security).
Page 10
Add Your Camera To begin viewing your camera, add it to the Night Owl app or to a compatible recorder. For more detailed setup steps, please scan the QR code below.
Camera Installation Use the holes in the back of each camera as a template to mark the screw positions on the surface where you plan to mount the camera. Use the holes in the back of each camera as a template to mark the screw positions on the Use the holes in the back of each camera as a surface where you plan to mount the camera.
Series support page: Please visit: Support.NightOwlSP.com Enter BWNIP4 into the Search bar or scan the QR Code FCC RADIATION NORM This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
Need help?
Do you have a question about the BWNIP4 and is the answer not in the manual?
Questions and answers