Table of Contents
Advertisement
Chapter 3: Startup Wizard
If you are NOT connecting your Wi-Fi NVR to the Internet, follow the onscreen steps for
updating firmware, device registration, and pairing cameras. Then, skip to "I Don't Want to
Connect the Wi-Fi NVR to the Internet."
3.1 Connected to the Internet
When prompted, log in using the Night
A
Owl Protect App credentials created in
Step 2.
NOTE:
The Wi-Fi NVR is automatically added
to the Night Owl Protect App when you log in
using your Night Owl Protect credentials.
Follow the onscreen steps to pair the
B
cameras to the Wi-Fi NVR.
NOTE:
When powered on, the cameras are
in pairing mode (Green Status Light flashes
rapidly). Refer to the "Pairing Mode" section if
a camera is not in pairing mode.
Make sure you see all of the cameras
C
in the Live View before completing the
Startup Wizard.
12
- Quick Links:
- Specifications
- Connecting Your System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
Used NVR password reset on mother board
The Night Owl WNIP2 Series does not allow password resets directly from the Wi-Fi NVR. To reset the password, you must use the Night Owl Protect App. Download the app from the Apple App Store or Google Play Store, create an account if you haven't already, and follow the app's instructions for password reset.
This answer is automatically generated
@Mr. Anderson it says it will send me email but it's not my email I bought on eBay
I have a WNIP2 system at my work and the manager that set up our system is no longer employed here. I set up an account myself but when I try to add system, it tells me it's already exists. How can I get the system released from his user name so I can add it to mine?