Connecting Woofer Speaker - Sony DHC-MDX10 Operating Instructions Manual

Recording the sound of connected
analogue components (continued)
Press MD I_11 for MD recording,
press REC PAUSE/START for tape
recording.
Recording starts.
6 Play the desired sound source.
To stop recording
Press II.
Tip
You can adjust the recording level to the desired
volume after performing step 4. (See page 42)
Before pulling out the power cord
MD recording is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press I / (_) (power) and
turn off the system. Do not pull out the power cord
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure the complete recording.
Connecting a super
woofer speaker
(except European model only)
You can connect an optional super woofer
speaker.
To super woofer
8O