Stations - Sony DHC-MDX10 Operating Instructions Manual

Step 2: Setting the time
(continued)
::::_::::_:::::,_:::::;;:_:_:_::_:,_::::: _;:_ _ :;: _:::_: :a_ :_:::;4:::_::_ _:::_: ::_:5:,: :; :: _ ;,:: _;: ::::_::_:::___ _::_,_ :_ _:._,_:: _:_ :,:
1
Press CLOCK/TIMER SET.
The hour indication flashes.
..' i;: F'l _'_
_., .,.,_ _.;, ......
2 Turn the jog dial to set the hour.
3 Press ENTER/YES.
The minute indication flashes.
IIIIII II I IIIII I I IIII ! I
Step 3: Presetting
radio stations
You can preset the following number of
stations:
- 2 band model: 20 for FM, 10 for AM.
- 3 band model: 20 for FM, 10 for MW and 10
for SW.
tl:3
(Power) Jog Dial
4
/.,_:.;.'!..{ _ ,,
4 Turn the jog dial to set the minute.
5 Press ENTER/YES.
The clock starts working.
Tip
f '
I you ve made a m_stake, start over from step 1.
To change the time
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER / YES.
4 Perform steps 2 through 5 above.
Tips
• The demonstration disappears when you set the
time. To activate the demonstration, press
DISPLAY while the system is off.
• The clock appears in the display while the system
is power off. When the system is in the power
saving mode, the clock indication disappears,
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
3 2 1
8