From A Tape To A Tape - Sony DHC-MDX10 Operating Instructions Manual

Recording from a
tape to a tape
-- High-speed Dubbing
You can use TYPE i (normal) or TYPE I[
(CrO2) tapes. The recording level is
automatically adjusted.
liO)
(Power) DOLBY NR
1
• 4
l i{ _ i
-L_ _ __J"Li
1 _I --_ _7.,7 _:- D's' ,' i
tot{, _.-
,F.f._ ......
3 2 1
1
Press _-- and insert a recorded tape
in deck A and a blank tape in deck
B.
With the side
you want to
play/record
facing forward
3 Press DIRECTION repeatedly to
select _ to record on one side.
Select c__) (or RELAY) to record on
both sides.
4 Press REC PAUSE / START.
Dubbing starts.
To stop dubbing
Press I.
Tips
• When you dub on both sides, start recording
from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to <_-) when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
2
Press HI-DUB.
Deck B stands by for recording.
54