Presetting Radio Stations; Playing Preset Radio Stations - Sony LBT-N250 Operating Instructions Manual

Compact hi-fi stereo system
Table of Contents

Advertisement

eee
Presetting Radio
Stations
You can store radio frequencies in the
tuner's memory to tune in your favorite
stations quickly. You can preset up to 20
EM stations, 10 MW stations and 10 LW
stations (for German and Italian models: 20
FM stations and 10 AM stations) in any
order.
Use the buttons on the unit for presetting
stations.
SYSTEM
POWER 3ON
1 Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
German and Italian models:
FM <-> AM
Other models:
aoe sade
2 Press TUNING (+/-) to tune in the
station you would like to store.
3 Press TUNING MEMORY.
"MEMORY" appears in the display.
sterco THEO
anaemgovoes
tt
3
}
b
Preset channel number
4 Press TUNING (+/-) to display the
preset channel number you decided on
(1 to 20 for FM, 1 to 10 for MW/LW/
AM).
Chapter 4: the Radio
D Press TUNING MEMORY.
"MEMORY" disappears, and the station
is stored at the preset channel number
you decided on.
Station frequency
creas
oe.
SUERENEAES|
fartaz iste tis}
Lists?
[ve] 10 $20}
Preset channel number
6 Repeat steps 1 to 5 for each station you
would like to store.
To erase a stored station
Store a new station at a previously used
preset station number. It will erase the old
station and replace it with the new station.
If you have trouble storing a station
Make sure "MEMORY"
is lit in the display.
If not, press TUNING MEMORY again so
that "MEMORY" lights up (for about eight
seconds) in the display, and then proceed
with steps 4 and 5.
i
ei)
Playing Preset Radio
Stations
Once you have preset the stations, use the
TUNING (+/-) buttons to quickly tune in
your favourite stations.
SYSTEM
'
POWER 30N
1 Press TUNER /BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
German and Italian models:
FM ¢—> AM
Other models:
gia
pines
2 Press TUNING MODE repeatedly so
that "PRESET" appears in the display.
3 Press TUNING (+/-) (or PRESET (+/-)
on the remote) to tune in a preset
station.
The station frequency appears and the
station begins broadcasting.
Station frequency
Preset channel

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcd-n250

Table of Contents