BST ekr 500 digital Installation And Commissioning Manual page 14

2
About Safety
14/162 ekr 500 digital Unit Touch – Installation and Commissioning Manual
WARNING
Danger to life caused by movements of the setting drive!
If position control is active, the setting drive may execute auto-
matic movements in manual mode . Body parts could be crushed,
sheared or impacted.
Ensure that no persons remain in the swivel or positioning
►
range of machine components positioned by the actuator.
WARNING
Danger of falling and damage to assets caused by stepping/climb-
ing onto components!
Stepping/climbing onto components (e.g. traverse bars or camera
housing) can lead to life-threatening falling accidents and to the
destruction of the components.
Never climb or step onto components.
►
WARNING
Danger to life due to missing Emergency Stop devices!
Severe injuries may occur, if no Emergency Stop device (Emer-
gency Stop button) is installed on the overall machine line. Only an
Emergency Stop device permits an immediate stop of the machine
line in emergencies. It is not permitted to operate the overall ma-
chine line without an Emergency Stop device.
If one is not already installed, have an Emergency Stop button
►
and Emergency Stop systems installed by the owner/user/
machine manufacturer prior to using the machine line.
WARNING
Severe injuries due to unfamiliarity with/non-observance of
Emergency Stop devices and safety information!
Prior to starting work, familiarize yourself with the Emergency
►
Stop and rescue devices of the overall machine line, e.g. Emer-
gency Stop button.
Prior to starting work, ensure that all safety regulations and
►
instructions are observed.
NOTICE
Damage to electronic components caused by ESD (electrostatic
discharge)!
Destruction/loss of capacity of electronic assembly elements
caused by contact with electro-statically charged persons/objects.
Only open system components at ESD-compliant workplaces
►
(according to 61340-5-1).
If there is no ESD-compliant workplace, take ESD protection
►
measures (according to DIN EN 61340-5-1) to discharge electro-
static charges in a controlled manner.
When returning electronic assembly elements, adhere to DIN
►
EN 100015 ("Protection of protection of electrostatic-sensitive
devices").
To transport electronic components, only use suitably marked,
►
electrically conductive ESD packaging.