Non-Intended Use; Non-Intended Infringement Of Guidelines; Non-Intended Operation - BST ekr 500 digital Installation And Commissioning Manual

2.2

Non-intended Use

2.2.1

Non-intended Infringement of Guidelines

2.2.2

Non-intended Operation

Every use is non-intended, that is not described in the chapter
Intended Use or does not comply with the guidelines specified
there, see Intended Use, page 10.
Infringement of operating, maintaining or installation instructions
■
Unsuitable, incorrect or unauthorized use of the product
■
Operating the product in an environment not intended for its
■
use
Operating the product in breach of the legal safety guidelines
■
relevant at the location of use
Neglecting the warning and safety instructions in the relevant
■
documents for the product
Operating the product under faulty safety and protective condi-
■
tions
Operation by unauthorized or insufficiently qualified personnel
■
By-passing, disassembling, switching off or manipulation of
■
safety equipment
Incorrect or negligent handling by the customer
■
Any intervention, modification or conversions on the product
■
without the express approval of BST GmbH
The use of unsuitable operating materials or spare parts
■
Operation of the product near to sources of interference, e.g.
■
electro-magnetic fields (high voltage lines) or sources of heat
Operation of the product under the influence of chemical,
■
electro-chemical or electrical factors
ekr 500 digital Unit Touch – Installation and Commissioning Manual
2
About Safety
11/162