BMW Motorrad R 1250 GS Rallye Supplementary Rider's Manual page 25

Footrest bracket on rear frame
Thread-locking compound: micro-encap-
sulated
28 lb/ft (38 Nm)
Installing the end muffler (
Removing the end muffler
Installing the rear-wheel stand (
Remove the screws 1.
Remove the muffler cover 2.
Slacken the nut 1 and push the clamp 2
backwards.
21).
Remove the screw 1 and shaped
washer 2.
Remove the end muffler 3 with abrasion
protection disc 4 and clamp 5.
Installing the end muffler
28).
Installing the rear-wheel stand (
Apply a thin coat of lubricant to the inside
of the clamp 1 and slide it onto the end
muffler.
Optimoly TA
Apply a thin coat of lubricant to the inner
diameter of the end muffler 2 and slide it
up to the stop.
Copper paste
Install the screw 3 with shaped washer 4
and abrasion protection disc 5.
Lubricant
Lubricant
21
28).