BMW Motorrad R 1250 GS Rallye Supplementary Rider's Manual page 24

20 OFF-ROAD USE
CONVERSION
Removing brackets for passenger footrests
Passenger footrests and grab handles
must always be installed when riding
with a passenger.
Installing the rear-wheel stand (
Remove the screws 1 and brackets for the
left passenger footrests 2.
The end muffler must be removed be-
fore the right bracket for the passenger
footrests can be removed.
Removing the end muffler (
Remove the screws 1 and brackets for the
right passenger footrests 2.
Installing the end muffler (
Installing brackets for passenger footrests
Installing the rear-wheel stand (
Clean the thread.
Attach the bracket for the passenger
footrests on the left 2 and install it using
new microencapsulated screws 1.
28).
Thread-locking compound: micro-encap-
sulated
28 lb/ft (38 Nm)
21).
The muffler must be removed before the
right bracket for the passenger footrests
can be installed.
Removing the end muffler (
21).
Clean the thread.
Attach the bracket for the passenger
footrests on the right 2 and install it using
new microencapsulated screws 1.
Footrest bracket on rear frame
28).
21).