Table of Contents
Advertisement
16
OPERATION
RALLYE SEAT
Removing the Rallye seat
Unlock the seat lock 1 by turning the vehi-
cle key clockwise and hold the vehicle key.
Lift the seat 2 at the rear and release igni-
tion key.
Take off the seat and set it on a clean sur-
face with upholstered side facing down.
Observing height adjustment
The front height adjustment 1 must always
be set to the high position (marked H).
The rear height adjustment 1 must always
be set to the low position (marked L).
Installing the Rallye seat
Insert the Rallye seat 1 into the recepta-
cles 2 on the left and right and then press
forward and downward in the rear area
until the lock audibly engages.
To remove and install seat with op-
tional equipment, see the vehicle rid-
er's manual.
INSTALLING THE FRAME GUARD
Requirement
Frame guard was not installed when vehicle
was handed over.
Requirement
Adhesion surface areas must dry and be free
of dust and grease.
Advertisement
Chapters
Table of Contents
