Atlas Copco GA 110 VSD+ Instruction Book page 82

Control panel
Reference
1
2
3
4
5
6
7
Procedure
Step
1
2
3
4
5
80
Designation
Touchscreen
Warning sign
Service sign
Operation sign
Voltage sign
Stop button
Start button
Action
Switch on the voltage. The voltage sign (5) lights up.
Close the condensate drain valves.
Open the air outlet valve.
Check the oil sight-glass. Minimum level should reach the oil sight-glass when the
compressor is stopped.
Open the water shut-off valves and the water regulating valve.
Function
Shows the compressor operating condition and a
number of icons to navigate through the menu.
The screen can be operated by touch.
Flashes in case of a shut-down, is lit in case of a
warning condition.
Is lit when service is needed.
Is lit when the compressor is running in automatic
operation.
Indicates that the voltage is switched on.
This button stops the compressor.
This button starts the compressor. The operation
sign (4) lights up. The controller is operative.
Instruction book
9829 3178 63