Adjusting The Anti-Scalp Rollers - Toro Groundsmaster e3200 Operator's Manual

Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, adjust the
height of the anti-scalp rollers
Model 31980 shown
Figure 12
Model 31981 shown
1. Park the machine on a level surface, lower the
cutting unit, shut off the machine, remove the
key, and turn the battery-disconnect switch to
the O position.
FF
2. Adjust the anti-scalp rollers as shown in
13.
Note:
Select a hole so the anti-scalp roller
is positioned to the nearest corresponding
height-of-cut desired.
(Figure 11 or Figure
Figure 11
12).
1. Anti-scalp roller
2. Bushing
g431236
g431247
Figure
13
Figure 13
Front rollers shown
3. Flange nut
4. Bolt
g296902