Yamaha QX5 Owner's Manual page 60

EDIT
* All operations are done on track 1.
* There are three levels of editing.
EVENT EDIT
* Search for the event you want to change.
* Use CURSOR to select data, <1 œ to change data.
* Execute the change. (Replace, Insert or Delete)
Select data
Change data <1 >
(Cursor blinking)
Search «>
(Cursor hidden)
M=0002-01-24/96
M=0002-01-24/96
e R
NOTE (1) E..2 O51 [JOB] = NOTE (1) E.. 2 051
HIFT] + [START] Replace with modified
event.
(SHIFT] + [SIOP] Insert modified event.
(SHIFT) + Delete selected event.
MEASURE EDIT
* Select JOB, select measures to be affected.
* Execute by pressing START.
Job Free memory
1>COPY 193
0005. . 0008
Measures
COPY Copy measures to the end of track.
DELETE Delete measures.
REMOVE Remove specified data.
SHIFT Change data value of specified messages.
QUANTIZE Adjust timing of all messages.
TRANSPOSE Move all notes up or down.
VELOCITY Move all velocity up or down.
GATE TIME Adjust gate time of all notes.
CRESCENDO Gradually change velocity.
CREATE Insert blank measures.
TRACK EDIT
* Select JOB, select tracks to be affected.
* Execute by pressing START.
Job Free memory
1>EXCHANGE 199
TR1 (04) TR8 (06)
Size of tracks
EXCHANGE Swap tracks/macros.
COPY Copy track/macro to track/macro.
TR.DOWN Combine both tracks into second track.
CLEAR Erase track/macro.
CUT Cut track 1 at specified measure and put
the "tail" in another track.
INSERT Insert track 1 in front of the specified
measure of another track.
EXTRACT Extract specified data from track 1 and
put it in another track.
CLOCK MOV Move timing of entire track.
THIN OUT Delete approximately half of all selected
continuous controller messages.
SHIFT Change data value of specified messages.
PLAYBACK
[TRACK] PLAY TR=1..,.....
Trl Tr2 Tr3 Tr4
[E3] Ea Switch tracks 1-4
[SHIFT] +
* While Stopped
Switch tracks 5-8
1-8 (*) On (End of data)
a Off
* While Playing
1-8 On
— Mute