Yamaha QX5 Owner's Manual page 36

Execute Save
2. TAPE LOAD
Load All
Load Floating
Load TR1..M32
Execute Load
35
The above display would save tracks 7 and 8, and macros 1-3. Start the cassette
record and press [START]. The display will show "Executing" for a few seconds
while it sends a header. Then the display will show the track or macro currently
being saved. When saving is complete, the display will show "Completed" for a
second. (While saving, you can abort by pressing [SHIFT| + |RESET].)
START
l la 1>TAPE SAVE R 1>TAPE SAVE
Executing. Tr7 0097/041
ENTER
1>TAPE SAVE Now saving Already saved size/Total save size
Completed
To load data that has been saved to tape, connect the cassette recorder and QX5
as described above. Use «1 to specify how the data will be loaded.
2>TAPE LOAD
Load what? (All, Floating, TRI .. M32)
All data in QX5 memory will be erased, and whatever is on tape will be loaded into
the track or macro it came from. (Saved data includes this information.)
Tracks and macros that did not receive data from tape are cleared.
if possible, received data is loaded into the track or macro it came from. However,
if the original track or macro already contains data, the tape data will be loaded
into whatever empty track or macro is available. Tracks and macros that did not
receive data from tape retain their old data. If there are no more empty tracks or
macros, the data will be ignored.
Here you can specify what part of the incoming data you will receive. (Track 1 to
Macro 32.) All other data will be ignored. Use [CURSOR] and «r> to select
start and end. If data is not received for a track or macro, the original data is preserved.
Mt
When you have specified how you will load the data, press [START]. The display _.
will show "Executing". Start the tape playback. When the QX5 finds the beginning
of the data, it will display the current track or macro being loaded, and the total
size of data loaded so far. When loading is complete, the display will show
"Completed" for a second
START
2>TAPE LOAD
IE
ee
aa
Executing.
ENTER
Start ap 2>TAPE LOAD = 2>TAPE LOAD
tape TR? to TR? 027 Completed
Now loading Total loaded size
lf you have specified certain tracks and macros to be loaded, the display will show
"Ignored" while skipping over the unwanted data.