What's Midi - Yamaha QX5 Owner's Manual

Digital sequence recorder
Hide thumbs Also See for QX5:
Table of Contents

Advertisement

REFERENCE E
WHAT'S MIDI?
Musical Instrument Digital Interface (MIDI) is a way for keyboards, synthesizers,
sequencers, rhythm machines, and computers to communicate
with each other.
Devices that have a MIDI jack can be connected together to send and receive in-
formation. Since most musical instrument manufacturers
have agreed on MIDI,
you can connect devices of various manufacturers.
Each piece of information is called
a MIDI MESSAGE. Each MIDI message is made
up of 1 to 3 bytes (numbers); a Status Byte and 0,1 or 2 Data Bytes.
The typical MIDI message is in the following form.
Sn. xx. yy
S = Status (8-E)
n
= Channel number (0-F indicates channel 1-16)
xx = First data byte (00-7F)
yy = Second data byte (00-7F)
Let's look at a sample 3-byte MID! message.
EE
Status (Note On)
Channel #4
Note #
Velocity
For example, if a DX7 synthesizer receives this message, it does the following.
1.
Checks the channel number to see if it is acceptable. tf the DX7 has been set
to receive that channel, it goes on to the next step.|f not, the message is ignored.
In the example above, the channel number is 4. (We count 0-F
as 1 to 16.)
2.
Checks the status. In this case, the status is Note On, so the DX7 knows to
expect two more data bytes; note number (what note) and velocity (how hard
it was hit).
an
3.
Reads the data bytes and produces the correct note with the correct velocity.
(Keep in mind that all this takes a very short time. It takes about 1/1000 of
a second to send a MIDI message. To us, it seems as though sound is produced
at the same time the key is pressed.)
Some MIDI messages have only two bytes; a status byte and a data byte.
For example,
C3. 05
is a Program Change message on channel 4, telling the receiving device to switch
to program number 6.
MIDI messages with a status byte from FO to FF have no channel number.
They
are called System
Messages, and are received by all devices regardless of their
channel setting.
For an explanation of each type of message, see the MIDI
Format Table on the
55
next page.

Advertisement

Table of Contents
loading

Table of Contents