Table of Contents
Advertisement
Name
PON
LAN
DC 12V
RST
Indication Panel
LED
Mark
Interface
LINK/ACT
Registration
REG
System
SYS
Figure 1-3: Interface/Button panel
Connect to OLT by SC type fiber connector, single mode optical fiber
cable.
Connect PC or other devices with Ethernet port by Cat5 cable, RJ-45
connector.
Connect with power adapter. DC 12V, 0.5A.
Press RST button over 10 seconds, onu restores factory default and
reboot.
Figure 1-4: Indication panel
Status
ON
Port is connected properly (LINK).
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data (ACT).
ON
Green：the device is registered to PON system.
Device has received optical signal and not registered to the
OFF
PON system.
Red：the Device does not receive optical signals.
Blink
Green：the device registration is incorrect.
On / Off System is not running or fatal error
Blink
Normal running
1GE Dual Mode ONU User Manual
Function
Description
Page 3
Advertisement
Table of Contents
