2. Power on Your Device Connect the original power adapter to your device and then your device will be powered on and connect to the Internet automatically.
3. Access the Internet Wi-Fi: Get the default SSID and password on the label and connect to the Wi-Fi network with your mobile device, and then access the Internet.
Page 5
Network cable(RJ45): Connect with the computer via LAN ports and then access the Internet.
Manage Your Device You can manage the device by logging in to the configuration web page. 1. View the label on your device to get the default Device Manager Website IP address and Password. 2. Launch the Internet browser and enter the Device Manager Website IP address in the address bar.
Page 7
Mesh Network Function Your device has the Wi-Fi Mesh ability. You can create Wi-Fi Mesh network to form a larger range of Wi-Fi network in your house and ensure seamless Wi-Fi roaming when you move.
Page 8
To set your mesh network: Log in to the management web page. Click Mesh Network icon Follow the instructions to create your mesh network. Enjoy your mesh network.
Page 10
LAN ports Connect to a PC. WAN/LAN WAN/LAN4: Connect to a WAN in the single WAN mode. ports WAN/LAN3: If you want to use two WAN connections, you need to switch to the Multi WAN mode on the management web page and then connect the other WAN to the WAN/LAN3 port.
Troubleshooting Internet Related Problems Symptoms Possible Problems / Solutions I cannot access the Internet at all. Please check your configuration settings. Please wait 1~ 2 minutes for the device to initialize. Check your network indicators. I cannot visit the management web Enter the correct IP address.
Page 12
Others Symptoms Possible Problems / Solutions View the label to get the default passwords. If you have changed the passwords and forgotten Problems with the passwords. them, you need to restore the device to the factory default settings. ...
ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Disclaimer Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.
Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed. • Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the device performance, damage the device or cause danger to you. •...
Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is...
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF exposure exceeding the relevant guideline limits. The transmitter is using external antenna that operate at 20cm or more from nearby persons. The FCC grant can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: SRQ-T3000...
Page 19
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. IC: 5200E-T3000...
IC Radiation Exposure Statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102 definies pour unenvironnement non controle Afin d'eviter la possibilite de depasser les limites d'exposition auxfrequences radio de la CNR-102, la proximite humaine a l'antenne ne doit pas etre inferieure a 20 cm (8 pouces)