Zte VS2801SG User Manual page 22

Parameter
IP Version
Name
Enable
Order
Protocol
State
Source IP Address
Source IP Mask
Start Source Port
End Source Port
Destination IP Address
Destination IP Mask
Start Destination Port
End Destination Port
The direction of data
flow
Mode
Figure 3-20: Custom Firewall Rule
Select IPv4 or IPv6.
Firewall rule name.
Enable or disable the rule.
Order of the rule.
Select protocol which the rule used for. There are only several
protocols can be selected.
Select data traffic state. Suggest using ANY.
Source IP address of traffic that matches the rule.
Mask of source IP address.
Start source TCP or UDP port. The protocol must be TCP or UDP.
End source TCP or UDP port. The protocol must be TCP or UDP.
Destination IP address of traffic that matches the rule.
Mask of destination IP address.
Start destination TCP or UDP port. The protocol must be TCP or
UDP.
End destination TCP or UDP port. The protocol must be TCP or
UDP.
Direction of data flow that matches the rule. In the option, CPE
indicates CPU of ONU.
Data forward mode of the rule, including discard and permit.
Page 19
1GE Dual Mode ONU User Manual
Illustration