Advertisement
Section 171—Disassembly
53
Chapter
Vil
BELT PULLEY
Section
DRESSER ly 4 sy ws srtanmonnin © Hehe aeRO
OC NEY es DEIR Sis
> Hm
AR Al
Ingpectionand Repairiciy
«casos v eeaw5 « aan
we
ae weY
so oe
172
Westmbl yess
¢ i236 2 ees
woes F ORAS Fo Bes ee
5 RE
eo
173
171.
DISASSEMBLY.
Remove the filler plug (fig. 50) and allow the oil to drain. Remove
the four cap screws that secure the cover to the housing. Remove
the cover and gasket. Remove the cotter pin, castellated nut, washer,
driven gear, and bearing from the pulley shaft. Tap on the side of the
pulley to remove the shaft from the housing. Remove
the four cap
screws that hold the pulley to the shaft. Remove the pulley. Lift the
drive gear and bearing assembly from the housing. Remove both oil
seals from the housing.
HOUSING
"SSFILLER PLUG
RM-612
Fig. 50—Belt Pulley
3730-473
§ 171.
Advertisement
