Ford Tractor 8N Service Manual page 22

Section 131—Disassembly 21
SNAP RING—7070——> ¢
COUPLING—7145
THRUST WASHER—7148
GEAR ASSEMBLY—7141
SHAFT—7140
SU WASHER—7149
SNAP RING—7155
= GEAR—7144
Fig. 13—Reverse Idler Gear, Disassembled
RM-614
(1) MAIN SHAFT ASSEMBLY. Remove the bearing from the
forward end of the main shaft (fig. 11). To remove the rear main shaft
bearing, install a bearing puller on the 60T gear, and remove the gear,
thrust washer, and bearing. Remove the rest of the gears from the
shaft. Remove the forward roller bearing and the 20T main drive
gear with a bearing puller.
(2) COUNTERSHAFT ASSEMBLY. Remove the rear roller
bearing (fig. 12) with a bearing puller. Press the countershaft gear
SHIFT RAIL STOR TRE
INTERLOCK BALL—353075-S—+@ mS
\ cue 717 Yn
BEARI —715
ain oe ad 5 715 SNAP RING—754
alicia BEARING al I. RM-603
iy BEARING CUP
7067
Fig. 14—Power Take-off Shift Assembly, Disassembled
§ 131. b. (2)
3730-475