Advertisement
Section 161—Disassembly
49
Chapter
Vi
POWER
TAKE-OFF
Section
DISASSEMBLY.
2.1 dine Ges aregn a -s snae ee RernlW Ba RN Ts WM
Me
RRND
161
Tsispectionvatid IREpalt yc
x seue stan > emg
Sew OE
aes
162
US testis ye enestate sw encase ae sama
amen
Sareneag aes; yc
eae
Mees
163
161.
DISASSEMBLY.
The disassembled
power
take-off assembly
is shown
in fig. 48.
a. Power Take-off Adapter. To disassemble the power take-off
adapter,
remove
the three cap screws
which
secure
the shield and
bearing cap (fig. 44) to the housing. Remove the shield and bearing
cap from the housing. Drive the bearing and shaft assembly out of
the housing. Grind the head off the rivet that secures the sleeve to
the shaft. Remove the rivet from the shaft and sleeve. Pull the sleeve
off the shaft. Remove the oil seal from the housing.
SHIELD
1%" SPLINED SHAFT
HOUSING
1%" SPLINED SHAFT
Fig. 44—Power Take-off Adapter
3730-473
§ 161. a.
Advertisement
