HPE AP-270-MNT-V2 Installation Manual page 4

3. Slide the holder of the AP into the opening of the mounting holder and use the two M6 x 20
screws (included in the package) to attach the AP to the mounting bracket.
Figure 5 Attaching the AP to the Mounting Bracket
Figure 6 Attaching the AP to the Mounting Bracket (Completed)
4. Use the cable tie to fasten the cables on the mounting bracket.
Mounting the AP to a Pole
To mount an access point to a pole, follow these steps:
AP-270-MNT-V2 Mount Kit | 4