Scope Of Delivery/Accessories; Overview; Description Of Functions; Technical Data - Parkside PBH 1550 B2 Translation Of The Original Instructions

ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Hammer Drill
• Keyed chuck (SDS-Plus adapter): ⌀ 13
mm
• Drill chuck key
• Additional handle
• Depth stop
• 2x 250 mm Chisel (SDS-Plus holder):
Pointed chisel, Flat chisel
• 3x Drill (SDS-Plus holder):
⌀ 12/16/18 mm
• Key for housing cover
• Lubrication grease
• Storage case
• Translation of the original instructions

Overview

The illustrations for the
device can be found on the
front fold-out page.
1 Chuck SDS-Plus
2 Dust cap
3 Locking sleeve
4 Holder for additional handle
5 Function selection switch
6 Retaining knob of function selection
switch
7 Housing cover
8 On/Off switch
9 Handle
10 LED display
11 Speed regulator
12 Mains connection cable
13 Keyed chuck
14 Drill chuck aperture
15 Drill chuck key
16 Additional handle
17 Lubrication grease
18 Depth stop
19 Drill (SDS-Plus holder)
20 Chisel (SDS-Plus holder)
21 Key for housing cover
22 Storage case
Fig. A
23 Loop
24 Locking screw of depth stop
25 Handle

Description of functions

The hammer and chisel drill is equipped
with an SDS-Plus tool holder (not remov-
able) and a removable keyed chuck.
Please refer to the descriptions below for
information on how the operating ele-
ments work.

Technical data

Hammer Drill ........... PBH 1550 B2
Rated voltage U ............... 230 V ∼, 50 Hz
Rated output P ..............................1550 W
Length Mains connection cable ...........3 m
Protection class ..⧈ II ( double insulation )
Weight (inkl. Zusatzhandgriff) ........ 4.9 kg
No-load rotation speed n
Impact rate ......................... 0–3900 min
Impact energy ................................. 5 Joule
Chuck capacity ....................... 1.5–13 mm
Drill diameter
–wood ............................................. 40 mm
GB MT
−1
... 0–800 min
0
−1
23