Advertisement
BI-DIRECTIONAL FUNCTIONS (Easywave neo)
In order to be able to use bidirectional functionalities, a server (e.g. APC01) can be programmed into the
RCJ35. The available functions are automatically detected, so no specific operation type needs to be
selected when programming a server. Program the server into the receiver according to the instructions
in the respective server application by adding an ELDAT actuator as an „Easywave neo" device. After it
is programmed, the server receives feedback about each switching operation performed, even if this is
triggered by another transmitter or manually via the external buttons on the RCJ35. The current state of
the receiver is therefore always displayed in the associated application.
If the server is to be used to move to specific positions of a roller shutter, a runtime measurement must
be carried out in advance.
Program server
Add an actuator in the Easywave app as an Easywave neo device and follow the instructions in the
app. Only one server can be programmed into the receiver. Any server that may have already been
programmed will be overwritten.
Operation
[Press button]
Indication
Start the programming process via the server application.
P 1x briefly
LED P flashes red
Complete the programming process via the application.
Once a server is programmed to the RCJ35, an acknowledgement for each switching ope-
ration is transmitted via radio. If the server is not in use, delete it from the receiver to prevent
unnecessary radio transmissions.
Delete the server
A server can be removed from the RCJ35 by deleting the relevant device in the server application. To
delete the server, the receiver must be powered and within range of the server. As an alternative to
deleting it via the app, the server can also be deleted by resetting the receiver.
Delete the receiver or relevant Easywave neo actuator in the server application, while the recei-
ver is powered and within range of the server.
GENERAL INFORMATION
Disposal
Waste electrical products should not be
disposed of with household waste!
Dispose of the waste product via a coll-
ection point for electronic scrap or via
your specialist dealer.
Put the packaging material into the re-
cycling bins for cardboard, paper and
plastics.
Note
Receiver in programming mode
any operating mode possible
Warranty
We will remedy defects on the device based on
material or production errors or exchange the de-
vice within the statutory warranty period.
Any unauthorized tampering with, or modifica-
tions to, the product shall render this warranty
null and void.
Conformity
Hereby, ELDAT EaS GmbH declares that the ra-
dio equipment type RCJ35 is in compliance with
Directive 2014/53/EU. The full text of the EU de-
claration of conformity is available at the following
internet address: www.eldat.de
c
Start programming
process in the server
application
d
P
Put the receiver in programming mode
e
Finish the program-
ming process in the
application
Customer Service
If the device does not work properly despite pro-
per handling or in case of damage, please contact
the manufacturer or your retailer.
ELDAT EaS GmbH
Schmiedestraße 2
15745 Wildau
Germany
Phone:
+49 3375 9037-310
Internet: www.eldat.de
E-mail:
info@eldat.de
Advertisement
