Table of Contents
Advertisement
Model : Machine model (EUR)
Type : Embossing mode
Volt : Power Supply
Hz : Frequency supply
Imax : Maximum current (Amps)
SN : Serial Number
Manufactured on
Fuse rating
Easy-Mark™ SOFTWARE INSTALLATION
Insert the Easy-Mark™ Installation CD in the CD ROM driver.
NOTE: If the CD ROM driver does not launch the Autorun.exe file automatically,
Read carefully the Readme.htm file, paying particular attention to the system requirements and follow the
software installation instructions.
When the installation is completed you will see the Easy-Mark™ icon on your desktop and the new "Easy-Mark"
folder in the Start-Programs list.
INSTALL SOFTWARE FOR THE USB TO SERIAL ADAPTER (IF NEEDED)
SYSTEM REQUIREMENTS
•
Windows XP SP2 (recommended), Windows 2000 SP4, Vista, Windows 7 and Windows 8
•
CablesToGo USB to Serial DB9 adapter (recommended)
•
Computer with available USB ports
INSTALL SOFTWARE FOR THE USB TO SERIAL ADAPTER
1.
Insert the CD that came with the USB to Serial Adapter into the CD drive on the target computer.
2.
If the auto start runs the installation go to step 6, if not continue.
3.
Click on the My Computer icon, either on the desktop or click Start and then My Computer.
4.
Double-click on the icon for the CD-ROM drive to display the files.
5.
Find the Autorun.exe or Setup.exe file and double-click on it.
6.
Select the option to install the USB to Serial Adapter you have with the Windows version you are
running.
7.
Connect the cable to one of the USB ports and reboot if prompted to reboot.
PES197 & PES197/E: PA25609A01_04
PES197 and PES197/E: ENGLISH
from the START menu of Windows
X:\Autorun.exe substituting the "X" with the letter of your CD unit
®
, select Run and digit:
Page: 4 of 18
1-2013
Advertisement
Table of Contents
