Installation
Check for dial tone
• If the phone wll
not be used for a
Charge the handset battery
long perod of tme,
remove the battery
to prevent battery
damage .
• If you have any
Language
trouble nstallng
your phone, please
vst our webste at
www .vtechphones .
com .
Set the dial mode
6
After the batteres are charged, pck up the handset and press TALK; you should hear a dal tone .
If you do not, refer to the Troubleshooting secton n the back of ths user's manual .
The battery may have enough power for short calls . Place the handset n the base, NEEDS
RECHARGING wll appear on the handset (f the battery s very low) . For best performance, charge
the battery for at least 16 hours before usng your telephone .
• Press PROG, then press
• The current settng blnks . Press
Espanol and Francas) .
• Press SELECT to save your selecton .
If you have touch tone servce, the phone s ready to use as soon as the battery s charged . If you
have pulse (rotary) servce, you'll need to change the dal mode .
• Press PROG.
• Press
or
untl the screen dsplays DIAL MODE: and the current settng .
• Press SELECT. The current settng blnks .
to select TONE or PULSE.
• Press
or
• Press SELECT to save .
www.vtechphones.com
untl LANGUAGE s dsplayed . Press SELECT .
or
or
untl the screen dsplays the correct language (Englsh,