Follett 25CI425A Installation, Operation And Service Manual page 3

Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the
different model numbers.
25CI425A-LI
§ Do not tilt unit further than 30° off vertical during uncrating or installation.
§ Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at all times. If
access to this area is required, power to unit must be disconnected first.
§ Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard capacity
#00130229, high capacity #00978957, carbonless high capacity #01050442).
§ Prior to operation, clean the dispenser in accordance with instructions found in this manual.
§ Ice is slippery. Be sure counters and floors around dispenser are clean, dry and free of ice.
§ Do not block right side air intake or top air exhaust.
I = ice-only; no water
Dispense actuation, L = lever, S = SensorSAFE
Condenser type, A = air-cooled, water-cooled
Ice machine capacity in lbs per day
Ice machine location, I = integral
Dispenser configuration, C = countertop, H = wall mount
Approximate storage capacity in lbs
CAUTION!
25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A 3