Table of Contents
Advertisement
Advanced operation
Caller ID
• XX MISSED CALL and the NEW icon will be displayed on screen if there
• Due to regional
service
differences,
• CALL LOG EMPTY will display on screen if there are no call log entries.
the caller ID
The call log can be accessed on the handset by pressing CID, or
information
pressing the center NavKey
may not be
NavKey
available for
every incoming
telephone number in the directory, the name of the entry will be shown,
call. In addition,
otherwise, the name will be shown as delivered by the telephone company.
the callers may
Review the call log
intentionally
block their name
• When in the call log, use the up or down NavKey
and/or telephone
number.
• The name, number, date and time of all incoming calls are displayed on
• The time of all
handsets is
•
automatically set
and updated with
incoming caller ID
Make CID entries ready to dial
information if you
Although the call log entries you receive are 10 digits, (the area plus the
subscribe to this
7-digit number,) in some areas, you may need to dial only the seven
service.
digits, or a 1 plus the seven digits, or a 1 plus the area code plus the
seven digits. You can change the number of digits that you dial or store
from the call log.
While reviewing the call log, press # repeatedly to display these dialing
options for local and long distance numbers before dialing or saving the
telephone number. See an example at right.
20
are new call log entries (including missed and un-reviewed calls.)
again. If the telephone number of caller ID matches the exact
the call log on the handset.
the screen.
There will be an error tone when the list reaches the top or the end of
the call log.
www.vtechphones.com
then CALL LOG, then press the center
or
to scroll through
HANDSET x
XX MISSED CALLS
CALL LOG EMPTY
>CALL LOG
RINGER VOLUME
A. PERSON
595-9511
3:45
AM
1/02
595-9511
1-595-9511
800-595-9511
1-800-595-9511
Advertisement
Table of Contents
