Table of Contents
Advertisement
Answering System Operation
FEATURE SUMMARY
SYSTEM ANNOUNCES:
"Set Security Code"
50*
"Set
Audible
Message
Alert"
Off */On
"Set Announce Only"
Off*/On
"Set Base Ringer"
Off/On*
"Set Number of Rings"
2
4*
6
Toll Saver
FEATURE SUMMARY
NOTE: You can press and hold CHANGE to advance the remote access code
in increments of ten.
NOTE: Exit Feature Setup at any time by pressing a PLAY/STOP button.
Listen to, Save & Delete Messages
The system automatically saves your messages until you delete them and can store 15
minutes of messages, memos, and announcements (up to a maximum of 99 messages).
A message or memo can be up to 4 minutes in length.
Before playing a message, the system announces the day and time it was received. While
the message plays, the message window displays the number of the message. After play-
ing the last message in a mailbox, the system announces "End of messages." If the
system has less than five minutes of recording time left, it announces the remaining time.
Default settings indicated by * .
DESCRIPTION/DIRECTIONS:
Set the remote access code you will use to ac-
cess features and functions of the answering
system from a touch tone phone. The code can be
changed to any two-digit number from 40 - 99.
When Message Alert is turned ON, the base beeps
once every 10 seconds when new messages have
been received.
When you turn Announce Only ON, callers hear
your announcement, but cannot leave a message.
Turn the Base ringer on or off.
Choose how many times the phone will ring before the
system answers a call. With Toll Saver active, the
system answers after two rings when you have new
messages and after four rings when you have no new
messages.
Default settings indicated by * .
Advertisement
Table of Contents
