Connect To The Answering System From A Remote Location; Voice Menu; Remote Access Commands - VTech i5867 Operating Instructions Manual

Answering System Operation

Connect to the Answering System from a Remote Location

You can access many features of this system remotely from a touch tone phone.
1. Dial your telephone number.
2. When the system answers, enter your Remote Access Code (preset to 50). The system
beeps once and then announces the number of new messages.
3. Enter a remote command (see Remote Access Commands below).
4. Press * 0 to exit remote operation.

Voice Menu

The system has voice prompts to help you with remote operation. Press * 5 to hear
the menu while remotely connected to the answering system.

REMOTE ACCESS COMMANDS

FUNCTION:
P
lay messages
in a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete a message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote access code, the voice
menu will be announced. After the voice menu announcement, if no key is pressed within
20 seconds, the remote access call will automatically end.
COMMAND:
Press #, then enter the appropriate mailbox
number (1, 2, or 3). The system plays new
messages. If there are no new messages, the
system plays old messages.
Press #4 while message is playing;
Pressing twice backs up to the previous message.
Press #6 while message is playing; each press
advances another message.
Press #5.
Hang up.
Press #9 while message is playing.
Press #7; system plays announcement,
then beeps.
Press *7; after beep, record announcement,
Press #5 to stop. System plays back
announcement.
Press *8; then mailbox number where
you want memo recorded; speak after
beep; press #5 to exit.
Press *0.
P r e s s # 0 ; t h e s y s t e m a n n o u n c e s ,
"Answering machine off." Press #0 again
to turn the system back on.
When system is off, it answers after 10
rings and announces, "Please enter your
security code." Enter your remote access code.
36