Table of Contents
Advertisement
For picking up dust on a floor in a standing position, it is
convenient to attach the extension wand (straight pipe)
to the cleaner.
Fig.16
► 1. Extension wand
Disposing of dust
CAUTION:
Empty the dust case before it
becomes too full, or the suction force weakens.
Be careful not to trap finger(s)
CAUTION:
between the dust case and cyclone body when
reassembling.
Dispose of accumulated dust as follows before it
exceeds the dust disposal line.
1.
Point the cleaner head downwards, hold the dust
case firmly, and then pull it apart from the cyclone body
while pressing and holding the release buttons on both
sides of the dust case.
1
Fig.17
► 1. Dust disposal line 2. Dust case 3. Release but-
tons 4. Mesh filter
1
3
2
2.
Empty the dust case and clean the adhered dust
off the mesh filter.
Fig.18
3.
Place the dust case back onto the cyclone body to
secure it in place with clicks.
1
Fig.19
► 1. Dust case 2. Release buttons 3. Cyclone body
CAUTION:
posed out of the dust case. Be careful not to let
the dust get into your eyes.
NOTICE:
remove and wash it with water. Dry the dust case
thoroughly before reassembly and use.
NOTICE:
ponents are secured in place properly before use.
NOTICE:
even after disposing of the dust and cleaning the
mesh filter, check whether dust has accumulated
inside the cyclone body or clogging has occurred.
4
MAINTENANCE
CAUTION:
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE:
or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
9 ENGLISH
3
2
The dust may fly up when dis-
When the dust case becomes dirty,
Make sure all the attachments and com-
If the suction force does not recover
Always be sure that the tool is
Never use gasoline, benzine, thinner, alcohol
Advertisement
Table of Contents
