Table of Contents
Advertisement
Hold the mounting end of HEPA filter (covered with
7.
high performance prefilter) and squeeze it back into the
cleaner body.
Fig.35
► 1. HEPA filter (covered with the high performance
prefilter) 2. Cleaner body
Sponge sheet
1.
Disassemble the cyclone unit from the cleaner
body.
Hold the mounting end of filter and pull it apart
2.
from the cleaner body.
Fig.36
► 1. Filter 2. Cleaner body
Pull the sponge sheet off from the suction
3.
opening.
Fig.37
► 1. Sponge sheet 2. Suction opening
1
2
1
2
2
1
Wipe and shake dust off the sponge sheet by
4.
hand.
Fig.38
5.
Wash the sponge sheet in soapy water when it is
clogged with dust and dirt. Dry it out thoroughly in the
shade before use.
Fig.39
13 ENGLISH
Advertisement
Table of Contents
