After Use; Maintenance - Makita DCL282F Instruction Manual

When using the paper filter
Remove the dust stopper and dispose of the paper filter.
1
Fig.34
► 1. Dust stopper 2. Paper filter
4.
Place the dust bag/new paper filter and dust stop-
per together into the cleaner and close the front cover.
NOTE: The cleaner is constructed in such a way that
the front cover comes off when trying to force the
front cover open at the angle of more than 90°. If the
front cover comes off, insert it into the front cover joint
in place.
Fig.35
► 1. Front cover 2. Front cover joint

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.

After use

out any other support may cause the cleaner to fall down,
resulting in personal injury or damage to the cleaner.
2
Fig.36
Cleaning
Cleaner body
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
1
Clean out also the suction opening, dust bag/paper filter
mounting area and the dust stopper.
2
Fig.37
Dust bag
Wash the dust bag in soapy water when it is clogged with
dust and the cleaner power becomes weak. Dry it out thor-
oughly before use. An insufficiently dried filter may cause
poor suction and shorten the service life of the motor.
Fig.38
13 ENGLISH
CAUTION:
Putting the cleaner against the wall with-