Fan; Removing The Fan - Dell NOT22857 Owner's Manual

3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Fan

Removing the fan

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the fan and provides a visual representation of the removal procedure.
Steps
1. Disconnect the fan cable from the connector on the system board.
2. Remove the two screws (M2x5) that secure the fan to the palm-rest and keyboard assembly.
3. Lift the fan off the palm-rest and keyboard assembly.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs) 53