In Case Of Difficulty - VTech 918 ADX Instruction Manual

I N C A S E
other calls, the problem is probably in your
wiring or local service. Call your local tele-
phone company.
YOU HEAR NOISE IN THE HANDSET, AND
NONE OF THE KEYS OR BUTTONS
WORK.
Make sure the power cord is plugged in.
Your Base Unit and Handset may not be
operating on the same channel or security
code. Place the Handset in the cradle for a
few moments to reload the security code and
reset the channel.
COMMON CURE FOR ELECTRONIC
EQUIPMENT
Electronics, like people, can sometimes
get confused. If the unit does not seem to be
responding normally, then try putting the
Handset in the cradle to reinitialize the unit. If
it still does not seem to respond, perform the
following steps (in the order listed):
1. Disconnect the power to the Base Unit.
2. Remove the Handset battery Pack
3. Wait a few minutes.
28
4. Connect power to the Base Unit.
5. Install the Handset battery pack.
6. Put the Handset in the Base Unit cradle
to reinitialize.
918manual.pm6
O F D I F F I C U L T Y
28 3/6/98, 3:22 PM
29