Intercom (Int.com) Led; Ringer Switch; Tone/Pulse Switch; Hold Key - VTech 918 ADX Instruction Manual

B A S E

INTERCOM (INT.COM) LED

Flashes rapidly when the INT.COM key is
pressed.
NOTE: The Handset must be away from
the Base Unit to use the INTERCOM
feature.
Blinks twice, accompanied by two
beeps, when the Handset answer the IN-
TERCOM call to the Base Unit.
Glows steadily while the Handset and
Base Unit are in INTERCOM mode.
SPEAKER (SPKR) LED
Glows when Base Unit is in SPEAKER-
PHONE mode.

RINGER SWITCH

Located on the right edge of the Base
Unit (antenna side)
14 3 selections: HIGH, LOW, OFF

TONE/PULSE SWITCH

Located next to RINGER switch
Select mode compatible with your local
telephone service (for most areas,
TONE is the preferred dialing mode).

HOLD KEY

Press this key to temporarily suspend
conversation without terminating the call.
With a call on HOLD, you can:
Intercom the Handset
918manual.pm6
U N I T F E A T U R E S
Transfer the call to the Handset
Return to the call by pressing SPKR.
NOTE: If you have placed a call on
HOLD and want to hang up:
Press SPKR to return to the call, then
press SPKR again.

FLASH KEY

This key is used in conjunction with
services such as CALL WAITING.

MUTE KEY

Press this key to mute the Handset
microphone during a conversation. You
will still be able to hear the other party,
but they cannot hear you.
Press MUTE again to resume two-way
conversation.

MEMORY (MEM) KEY

Press this key to enter MEMORY
DIALING mode.
The sequence for dialing a phone
number stored in memory is: Press
SPKR,MEM, Memory Location (0-9).

PRIVACY (PRV) KEY

During a call, press PRV to prevent the
Handset from joining the conversation.
14 3/6/98, 3:21 PM
15