Table of Contents
Advertisement
H A N D S E T
900MHz
CORDLESS
PHONE
INT.COM LOW BATT/MUTE
*
Handset SPEAKERPHONE(FLASH) Key
The 918 ADX has a speakerphone built-in to
the Handset. The Handset SPEAKERPHONE
provides the same features as the regular
PHONE function of the cordless handset, but
with the added benefit of hands-free operation.
Throughout this manual, whenever a dialing
function is explained,the example given will ref-
erence the PHONE key only. However,this also
applies to the Handset SPEAKERPHONE key.
Press this key to get dial tone or answer
an incoming call.
During a call,press this key to FLASH the
line. This feature is used in conjunction
with services such as Call Waiting.
PHONE LED
Glows steadily when theHandset is in
use.
Flashes slowly when a call is on HOLD.
Flashes rapidly when Handset is in
Program (PRG) mode.
918manual.pm6
F E A T U R E S
INT.COM LED
LOW BATT/MUTE LED
HANDSET
PHONE (FLASH) Key
INT.COM Key
OFF Key
11
Flashes in cadence with an incoming ring.
Glows steadily when the INT.COM key
is pressed on the Handset
Flashes to signify that the Handset bat-
tery pack needs recharging.
Glows steadily when the MUTE key is
pressed during a call.
Press this key to get a dial tone or answer
an incoming call.
During a call, press PHONE to FLASH
the line. This feature is used in conjunc-
tion with services such as Call Waiting.
Press this key to initiate two-way, inter-
nal communication between the Handset
and Base Unit. The Base Unit will emit
two beeps, and will then automatically
enter Intercom mode. The party at the
Base Unit does not need to press any
key to activate this feature, when it is ini-
tiated from the Handset.
Press this key to end a call, exit from In-
tercom (INT.COM) mode or Program
(PRG) mode. You can hang up in the
HOLD mode by pressing OFF.
3/6/98, 3:21 PM
11
Advertisement
Table of Contents
