Handset Features - VTech VT 2458 Manual

1. IN USE/LOW BATTERY LED
* Glows when the Handset is in use.
* Flashes duing programming mode.
* Flashes in cadence with incoming
ringing.
* Flashes slowly when the battery pack
needs recharging.
2. PHONE/FLASH
* Press this key to answer a call or get
a dial tone. While on a call, when
you receive a Call Waiting alert, press
PHONE/FLASH to switch between
calls.
3. ANSWERING MACHINE
* Press this key to enter Answering
System mode. It will flash while the
Handset is controlling the Answering
System. It will also flash to alert you
to new messages.
See the section Handset Layout
For Answering System Operation
for more details.
1
2
3
4
4. VOLUME UP /VOLUME DOWN
* These keys will raise and lower the
5. REDIAL/PAUSE
* With the Handset ON, pressing this
6. OFF
* Press this key to end a call.The OFF
7. PROG/MEM
* This key is used to enter Programming
8. CHANNEL
* If you experience noise or interference
5

Handset Features

5
6
7
8
earpiece volume while either IN
PHONE or ANSWERING SYSTEM
mode.
key will dail the last number you
called. In Programming mode,
REDIAL/PAUSE will add a 4 second
pause to a dialing sequence.
key is also used to exit all modes of
operation.
mode, as well as Memory Dial mode.
while on a call, press CHAN to switch
to a clear channel.