Evenflo Pivot Xplore Dreamz - All-Terrain Stroller Wagon with Bassinet Insert Manual

FEATURES

1. Parent's Handle
2. Adjustable Handle Button
3. T-slot Brackets
4. Bassinet Insert
5. Basket Cupholder
6. Storage Basket
7. Bassinet Insert Hook
   (Behind Storage Basket)
8. Parent Storage Strap
9. Brakes
10. Canopy
11. Airflow Window
12. Canopy Extension Zipper
13. Parent's Handle Flip Release
14. Fold Release Levers
15. Footwell
16. Easy Entry Release Lever
17. 3-Point Child's Harness
18. Child's Tray
19. Bassinet Attachment Zipper
20. Additional Storage Basket Mount
21. Seatback Flap
22. Storage Pouch
23. Handle Mounts
24. Swivel Wheel
25. All Terrain Rear Wheels

* styles may vary

IDENTIFICATION OF PARTS

* styles may vary

CHOOSING MODE OF USE

YOUR PRODUCT CAN BE USED IN THREE DIFFERENT MODES: STROLLER MODE, WAGON MODE OR BASSINET MODE.

After the frame and the wheels have been assembled, you can choose to set the product up in Stroller Mode, Wagon Mode or Bassinet Mode.
Follow instructions.

• Stroller Mode
  Push in stroller mode – Have full view of your kids
  
• Wagon Mode
  Pull in wagon mode – Great for uphill and all-terrain excursions
  
  
• Bassinet Mode
  Quilted sleep insert for naps on the go.
  

ASSEMBLING YOUR PRODUCT

Note: To protect flooring, place a protective covering (cardboard, towel, small rug or blanket) beneath the product during assembly.

1. Align parent's handle and slide it into handle mounts. CHECK to ensure holes are aligned. If holes do not align, flip handle and reassemble.
2. Insert nut and bolt through holes on handle mount and handle as shown.
3. Secure to frame using hex wrench and nuts & bolts as shown.

To avoid injury to fingers or hands, care must be taken when opening and closing the product to prevent injury in hinge areas.

1. Lock parent's handle onto handle mount by pushing on both sides until each side clicks into place.
   
2. Pull on parent's handle to ensure both sides are locked in place.
3. To attach all-terrain rear wheels, push wheel onto rear leg tube until it clicks into place. Repeat on other side.
   
   
   Pull on wheels to make sure both of them are securely attached.
   To remove, press tab on underside of wheel mount and pull wheel off product.
   
4. Locate left and right front wheel assemblies. The left wheel will be marked with a green colored dot. To attach front left wheel, match green colored dot with green colored dot on frame. Line up metal pin with hole in front wheel mount and push on to frame as shown until it clicks into place.
   
   Repeat process on right side, matching yellow colored dots.
   Pull on wheels to make sure both of them are securely attached. Lift parent's handle straight up.
   
   To remove, insert flat-head screwdriver into slot and pull wheel off product.
   
5. While holding handle up, lock both rear wheels Next, spread front and rear wheels apart until product is in self-standing mode.
   
6. While holding the parent's handle with your right hand, squeeze fold release lever with your left hand. Holding fold release lever in, press down with your right hand.
   
   
7. Lift back of product frame until both sides click in place and the lock indicators show GREEN.
   NOTE: Both lock indicators MUST show green to ensure product is locked into place securely.
   
   
8. Next, lift front of frame until both sides click in place. Press on frame to make sure it is securely locked in place.
   
   
9. Check that the top rail is fully latched. Check both sides to ensure that the red indicators are not visible.
   

10. Squeeze adjustable handle button and pull to fully extend parent handle until it CLICKS into place at your most comfortable position.
    
    
11. To attach storage basket, lift seatback flaps. Align locator teeth on basket and basket mount and push down on sides of basket until storage basket is securely in place A.
    
    Reassemble seatback flaps, lower canopy and basket B.
    
    
    To remove storage basket, lift seatback flaps. Lift mount up and forward.
    
12. To store bassinet insert on stroller wagon, flip up storage basket and place handle of bassinet insert on hook. Flip storage basket back in place.
    
    
13. To attach child tray, align t-slots on both sides. Push tray until both sides CLICK in place.
    Pull up on tray to make sure it is locked into place.
    
    
    To remove, press down on gray buttons on either side of child's tray and lift tray up.
    
    
14. To attach canopy, slide canopy onto canopy track on the frame until it CLICKS into place.
    Repeat on other side.
    Pull back on canopy to make sure it is locked into place.
    
    
    To remove canopy, press on tab and slide canopy back as shown.
    

USING YOUR CANOPY

1. To extend canopy, pull it up as shown.
   To close, push canopy down as shown.
   
2. The canopy can be used as 2 or 3 panels. To shorten canopy length, locate zipper at bottom and zip fully around canopy.
   

CONVERTING FROM STROLLER TO WAGON MODE

To avoid injury to fingers or hands, care must be taken when opening and closing the product to prevent injury in hinge areas.

1. To convert from stroller to wagon mode, lock both rear wheels.
   From front of product, locate parent's handle flip release. While rotating out, lift handle up. Rotate parent's handle to wagon mode.
   
   
2. Squeeze adjustable handle button and push to fully retract parent's handle until it locks in place in the lowest position.
   

ATTACHING THE BASSINET INSERT

Use in bassinet mode only when child is lying down and sleeping. Only use bassinet mode with children at least 6 months old. Discontinue use of bassinet mode when infant has reached 33 lbs (14.9 kg).

Follow the instructions to unfold stroller wagon. Ensure child tray is removed and no adapters are in t-slots.

1. Unzip both sides and pull hook and loop flap to fully unfold.
   
2. Rotate support bar at bottom of bassinet.
   
3. Place bassinet insert in stroller wagon, aligning the cloud icons on the side of the wagon as shown.
   
4. Zip the bassinet insert completely to the wagon to cover stroller wagon seats.
   
   
5. Attach the bassinet brackets to the t-slots on both sides of the stroller wagon. Push bassinet brackets into slots until both sides CLICK into place.
   
   NOTE: Child tray cannot be installed when bassinet is in place.

REMOVING THE BASSINET INSERT

1. Pull brackets up from t-slots on both sides of the stroller wagon.
   
2. Unzip the bassinet insert and remove from the stroller wagon.
   
   
3. Turn support bracket at bottom of bassinet insert as shown.
   
4. Fold bassinet insert and zip both sides. Attach hook and loop flap to complete.
   

USING YOUR BRAKES

To avoid serious injury, always lock brakes. Make sure brakes are on by trying to push the product.

To lock, push lever DOWN at bottom of brake as shown.

To unlock, push lever UP at top of brake as shown.

USING STORAGE BASKET

Storage basket can be used on either back or front of product.

When riding with only one child, flip storage basket and push basket fabric down into itself to reverse use. This mode can be used on either the front or back of the product. Storage basket includes two collapsible cup holders. Simply push out to use.

NOTE: Cup holders will not work when storage basket is flipped over and used inside stroller wagon.

USING PARENT'S HANDLE

To extend parent's handle, squeeze button on handle and pull handle out until it locks into one of the three height positions. To lower parent's handle, squeeze button and push handle down until it locks into position.

NOTE: In wagon mode, it is recommended the parent's handle is used all the way down.

SECURING YOUR CHILD

To avoid serious injury from falling or sliding out, ALWAYS use waist restraint.

For easy entry into stroller wagon, stand in front of product and squeeze easy entry release lever. Lower front of stroller wagon down.

Once child enters stroller wagon, lift front of stroller wagon back up until it clicks into place.

NOTE: Check that the top rail is fully latched and that the red indicators are not visible.

To attach waist straps to crotch buckle, insert buckles A into crotch strap as shown.

To unlock harness, push the button on the crotch buckle.
To tighten, pull the free end of the straps as shown.

FOLDING YOUR PRODUCT

To avoid injury to fingers or hands, care must be taken when opening and closing the product to prevent injury in hinge areas.

1. Make sure parent's handle is in stroller mode position by pushing it into frame lock until it clicks into place.
   
   
   Bassinet Insert MUST be removed prior to folding. Refer for removal steps.
2. Flip basket inside out.
   
3. Adjust handle to lowest position.
   
4. Lower front of stroller wagon down using easy entry release lever.
   
5. Standing in front of product, squeeze fold release lever on both sides of frame and pull up into self-standing position.
   Walk around to the back, lean the stroller wagon on its rear wheels, squeezing the fold release lever marked "unlock" once more for compact fold.
   
   Both lock indicators MUST show green to ensure it is locked into place securely. To unfold stroller wagon, see "ASSEMBLING YOUR PRODUCT".
   
6. Next, lift front of stroller wagon frame until both sides click in place. Press on frame to make sure it is securely locked in place.
   

CARE AND MAINTENANCE

• Clean minor spills and stains on cloth or plastic surfaces with cold water and mild soap. Air dry.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth.
  DO NOT use abrasive cleaners or solvents.

Limited Warranty

For warranty service, contact Evenflo's ParentLink Consumer Resource Center at 1-800-233-5921 8 AM – 5 PM E.T.
or www.evenflo.com.

SAFETY INSTRUCTIONS

READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS!
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH!

• NEVER leave children unattended. ALWAYS keep children in view while in the product.
• Adult assembly required. Take care when unpacking and assembling; contains small parts and some items with sharp edges.
• To prevent a possible choking hazard, remove and discard packing material before using this product.
• Avoid serious injury from falling or sliding out. ALWAYS use waist restraint.
• DO NOT carry or roll product on stairs or escalators with child in it.
• DO NOT hang items on parent's handle or place them on the canopy as they can tip product over and injure child.
• ALWAYS exercise care when going over curbs or steps, and never use product for anything other than transporting your child. Use at a normal walking pace only; faster strolling can cause a loss of control and injury to the child.
• DO NOT place hot liquids in storage pockets. Spills can burn you or your child.
• DO NOT use product if any parts are missing or broken.
• DO NOT allow child to climb on, into or out of product unless easy entry release lever is released by parent.
• DO NOT allow child to stand on the footwell. Product may tip over and injure child.
• DO NOT allow child to climb on, into or out of product unassisted.
• DO NOT carry additional children, goods, or accessories in or on this product except as advised in these instructions. The product is intended for use with one or two children and to accommodate only the additional weights in storage as listed in these instructions.
• To avoid tipping, always remove the heavier weight child from a seating position before removing the lighter weight child.
• DO NOT allow child to push or pull product in any mode.
• DO NOT allow child to sit, stand or climb over the storage basket or child's tray.
• DO NOT step on parent's handle in wagon mode.
• DO NOT enable easy entry when the front seat is occupied.
• DO NOT allow child to stand while product is in motion.
• DO NOT allow child to jump on seat or footwell.
• ALWAYS ensure product is in a fully locked position before using.
• Care must be taken when folding and unfolding product or changing handle modes to prevent finger injury to you or your child in hinge areas. Make sure child is not in the seat or near the product when folding or unfolding.
• DO NOT exceed the maximum weight limits.
• NEVER leave product on a hill or incline, even with brakes set, to avoid product from tipping.
• To avoid accidental rolling, ALWAYS set brakes when product is not being used.
• Use in bassinet mode only when child is lying down and sleeping. Only use bassinet mode with children at least 6 months old. Discontinue use of bassinet mode when infant has reached 33 lbs (14.9 kg).
• Infants have suffocated:
  • In gaps between extra padding and side of bassinet/cradle, and on soft bedding
  • Use only the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
  • To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
  • When child is awake they must be secured with harness.
  • Do not leave child unattended while the bassinet is being used.
• AVOID STRANGULATION:
  • DO NOT suspend strings or toys from the canopy.
  • DO NOT place product anywhere near cords from window blinds, draperies, phone, etc.
  • DO NOT place items with a string around your child's neck such as hood strings or pacifier cords.
  • DO NOT suspend strings over a bassinet or cradle or attach strings to toys.
  • If not properly secured, the child may slip into leg openings and strangle.
• When making adjustments to the product, ALWAYS ensure that all parts of the body are clear of any moving parts of the product particularly when switching modes.
• The canopy is not intended to provide complete UV protection.
• Sharp or heavy objects placed in pockets may cause damage to the product, or injury to the child.
• Contact Evenflo ParentLink at 1-800-233-5921 (USA) or 800-706-1200 (Mexico) with any questions regarding use of your product.
• To avoid product instability and tip-overs, DO NOT load storage pockets with over 1 lb (0.45 kg), and storage basket with over 10 lbs (4.5 kg).
• To avoid serious injury, NEVER use the product in any other configuration other than what is shown in the instruction manual. This product can be used in multiple configurations as a stroller, wagon, and bassinet.

IMPORTANT INFORMATION

Child Requirements

Wagon - Only use the product with a child who is capable of sitting upright unassisted and maintains good neck control.
Maximum weight: 55 lbs (25 kg) in each seat.
Maximum height: 39 inches (99 cm)

Bassinet - Only use when child is sleeping.
Minimum age: 6 months
Maximum weight: 33 lbs (14.9 kg)

Read instructions carefully before use. Save these instructions for future reference. It is very important to assemble the product according to these instructions. If you are missing parts, do not use product and call Evenflo ParentLink at 1-800-233-5921 (U.S.A.) or 800-706-1200 (Mexico) to order replacement parts.

For additional use configurations with optional accessories, you can refer to the manuals that are provided with the Pivot Xplore Accessories, which are sold separately. These include but are not limited to: infant car seat adapters for car seats and a toddler seat option.

Registration Information

Please register this product so we can reach you if there is a safety alert or recall. We will not sell, rent, or share your personal information. To register your product, please complete and mail the card that came with it or visit our online registration at www.evenflo.com/registerproduct.
For future reference, record the Model Number and Date of Manufacture. You can find this information on one of the rear product legs.

Documents / Resources

References

• Car Seats, Strollers, & Baby Essentials | Evenflo® Official Site – Evenflo® Company, Inc
• Evenflo® Product Registration | Evenflo® Official Site – Evenflo® Company, Inc

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Evenflo Pivot Xplore Dreamz - All-Terrain Stroller Wagon with Bassinet Insert Manual