Printer Settings - Olivetti d-Copia 2500MF Advanced Operation Manual

System Menu

Printer Settings

Emulation
Resolution
6-48
Printing from computers, settings are generally made on the application
software screen. However, the following settings are available for
configuring the defaults to customize the machine.
• Emulation ...6-48
• Resolution ...6-48
• EcoPrint ...6-49
• KIR ...6-49
• Override A4/Letter ...6-50
• Duplex ...6-51
• Copies ...6-51
• Orientation ...6-52
• Wide A4 ...6-53
• Form Feed Timeout ...6-53
• LF Action ...6-54
• CR Action ...6-54
Set emulation options to run the machine by the commands for other
printers. Refer to Emulation on page 3-2 for the setting method.
You can set the resolution used for printing.
Select default resolution from Fast1200, 600 dpi, or 300 dpi.
NOTE:
Fast1200 is our original resolution mode, in which photo and
other graphic halftone can be reproduced much better than 600 dpi.
Use the procedure below to set the resolution.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Resolution.
ADVANCED OPERATION GUIDE