Olivetti d-Copia 2500MF Advanced Operation Manual page 45

Copying Functions
1-30
If you selected [1-sided>>Booklet], choose the binding orientation in
Finishing.
5
If you choose [1-sided>>Booklet] or [2-sided>>Booklet], you can add the
cover. Press [Cover], select [Cover] and press [OK].
6
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
7 Press [OK].
8 Place the originals in the document processor or on the platen and press
the Start key.
NOTE:
When using the platen, be sure to place the originals in page
order.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
ADVANCED OPERATION GUIDE