Sharpness - Olivetti d-Copia 2500MF Advanced Operation Manual

Sharpness

ADVANCED OPERATION GUIDE
Select the sharpness of the image outline.
The table below shows the available settings.
Item
Sharpen
Unsharpen
NOTE:
You cannot specify the sharpness if you selected [Monochrome]
in Color Selection (see page 2-25).
Use the procedure below to set the sharpness when sending scanned
images.
1 Place the originals on the platen.
2 Press the Send key.
3
Press [Color/Image] and then [Sharpness].
4
Press [-3] to [+3]
(Unsharpen-
Sharpen) to adjust
the sharpness.
5 Press [OK].
6 Specify the destination, and press the Start key to start sending.
Detail
Emphasize the image outline. Make letters and
lines appear sharper.
Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Ready to send.
Place original .

Sharpness

Press [OK] to display
Unsharpen
the image.
-3 -2 -1
Add Shortcut
Status
Sending Functions
2
Destination
1
Sharpen
0 +1 +2 +3
Cancel OK
10/10/2007 10 :10
2-23