Reordering Print Jobs - Olivetti d-Copia 2500MF Advanced Operation Manual

Reordering Print Jobs

ADVANCED OPERATION GUIDE
This function allows you to select a queued print job and raise its output
priority.
NOTE:
You cannot assign a higher priority than the job currently being
printed or jobs that have been queued due to an interruption. Nor can you
assign a priority higher than a job being processed.
You cannot lower a job's priority.
The procedure for reordering print jobs is explained below.
1
Press the Status/Cancel key.
2
Press the [Printing Jobs].
3 Select the job to be
assigned a higher
priority and press
[Move Up].
The priority of the
selected job is
increased by 1 .
To further raise the
job's priority, press
[Move Up] again.
Each time you press
[Move Up], the
priority increases by 1.
Status
Status Log
All
Job Type
Job No. Accepted Time Type Job Name
000081 14:21 doc 20070506142153
000082 14:22 doc 20070506142210
Pause All Cancel Priority
Print Jobs Override
Printing Jobs Sending Jobs Storing Jobs
Status
Status / Job Cancel
User Name Status
AAAAA InProcess
AAAAA Waiting
001 /001
Move Up Detail
Device/ Paper /Supplies
Communication
10/10/2007 10 :10
5-15
5