Table of Contents
Advertisement
2) Low voltage battery
The remaining battery capacity is too low and the tool will not operate. In this situation, remove and
recharge the battery.
3) Switch action
WARNING! Before inserting the battery into the tool, always check that the switch trigger
actuates properly and returns to the "OFF" position when released.
To prevent the switch trigger from being accidentally pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the switch trigger. Release the switch trigger to
stop.
4. ASSEMBLY
WARNING! Always be sure that the tool is switched off and the battery is removed before
assembling the tool.
4.1 INSTALLING OR REMOVING SAW CHAIN
WARNING! Always wear gloves when installing or removing the saw chain.
- Loosen the screw by turning the knob counterclockwise until the sprocket cover comes off.
Lock-off
button
Sprocket
cover
13
ON/OFF
switch
Knob
Advertisement
Table of Contents
