Table of Contents
Advertisement
safe way and understand the hazards involved.
Children shall not play with the charger. Cleaning
and user maintenance of the charger shall not be
made by children without adult supervision.
2)
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
3)
To charge the battery, use only the charger supplied.
4)
Never charge non-rechargeable batteries.
5)
During charging the batteries must be placed in a
well ventilated area.
1.6 VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration
and low noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1) Only use the product as intended by its design and these instructions.
2) Ensure that the product is in good condition and well maintained.
3) Use correct attachments for the product and ensure they are in good condition.
4) Keep tight grip on the handles surface.
5) Plan your work schedule to spread any high vibration tool use across a longer period of time.
1.7 RESIDUAL RISK
Even if properly operating and handling this product in accordance with all the safety requirements,
potential risks of injury and damage remain. Due to its construction and build, this tool may present
the following hazards:
1) Electric shock from insufficient insulation. Do not use the product when the product or your
hands are damp or wet.
2) Ear damage if working without ear protection.
3) There is a risk of a short-circuit due to liquid penetrating the housing. Do not immerse the
product and the accessories in water. And make sure that no water or other liquid can enter the
housing.
4) Damage to your health caused by swinging your hands and arms when operating the tool for
longer periods of time or if the tool is not held or maintained properly.
WARNING! During operating, the product generates an electromagnetic field which, under
certain circumstances, may impair the functionality of active or passive medical implants. To reduce
10
Advertisement
Table of Contents
