Related Manuals for Energizer EZSO14210
Summary of Contents for Energizer EZSO14210
- Page 1 ORIGINAL INSTRUCTIONS >EN MITER SAW EZSO14210 USER GUIDE CAUTION: Read this manual before use this machine!
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS 2. TECHNICAL DATA 3. DESCRIPTION 4. INTENDED USE 5. BEFORE STARTING THE EQUIPMENT 6. ATTACHMENT AND OPERATION 7. TRANSPORT 8. MAINTENANCE 9. STORAGE 10. ELECTRICAL CONNECTION 11. TROUBLESHOOTING 12. DISPOSAL AND RECYCLING 13. DECLARATION OF CONFORMITY 14. -
Page 5: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 6 a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Page 7 h) Do not use the saw until the table is clear of all tools, wood scraps, etc., except for the workpiece. Small debris or loose pieces of wood or other objects that contact the revolving blade can be thrown with high speed. Cut only one workpiece at a time.
- Page 8 center. Objects such as cloth, strings, should never be left in the working zone. Avoid cutting nails. Check the workpiece and remove all nails and other foreign objects before starting the machine. Hold the workpiece firmly. Avoid collecting debris or sawdust on the saw before the saw is completely stopped and the blade guard is in the open position.
- Page 9 1.4 RESIDUAL RISKS Warning: When using a power tool, basic safety precautions should be taken to avoid the risk of fire, electric shock or injury to persons. Please read the additional safety instructions in this manual carefully and note that even if the power tool is used in accordance with the operating instructions, it is not entirely certain that all residual risk factors will be eliminated.
- Page 10 1.5 SYMBOL EXPLANATION To reduce the risk of injury, the user must read and understand this manual before using this product. Wear ear protectors. Exposure to noise can cause hearing loss. Wear protective goggles. Wear respiratory protection. wear protective gloves Double insulation.
-
Page 11: Technical Data
2. TECHNICAL DATA Model EZSO14210 Mains voltage/ frequency 220-240 V~50 Hz Power S1:1400W; S6(25%)1700W Speed 4900/min Type Single Phase Ø210*Ø 30*48T*2.6 mm Blade size 7000/min Tilting swing arm 45° G/D Swivel base 45° G/D Sound pressure level LpA 93 dB(A) -
Page 12: Description
3. PRODUCT DESCRIPTION... - Page 15 Handle Pointer ON/OFF switch Set screw Lock switch Locking bolt Machine head Screw for cutting depth limiting Moving saw blade guard Stop for cutting depth limiting Saw blade Adjusting screw (90° ) Clamping device Adjusting screw (45° ) Workpiece support Flange screw Table insert Outer flange...
-
Page 16: Intended Use
4. INTENDED USE The miter saw is designed to crosscut wood respective of the machine’s size. The saw is not designed for cutting firewood. Warning! Do not use the saw to cut materials other than those specified described in manual. Warning! The supplied saw blade is only intended for the sawing of wood! Do not use this blade for the sawing of firewood! The equipment is to be used only for its prescribed purpose. -
Page 17: Before Starting The Equipment
5. BEFORE STARTING THE EQUIPMENT Open the packaging and remove the device carefully. Remove the packaging material as well as the packaging and transport bracing (if available). Check that the delivery is complete. Check the device and accessory parts for transport damage. ... -
Page 18: Attachment And Operation
6. ATTACHMENT AND OPERATION 6.1 ATTACHING THE MITER SAW (FIG.1/2/4/5) In order to adjust the rotary table (13), loosen the set screw (10) approximately 2 turns. Turn the rotary table (13) and pointer (11) to the de-sired angle measurement on the scale (12) and use the set screw (10) to secure it. - Page 19 The moveable stop rail (16a) must be fixed far enough in front of the innermost position that the distance between the stop rail (16a) and the saw blade (6) amounts to a minimum of 8 mm. Before making the cut, check that the stop rail (16a) and the saw blade (6) cannot collide. ...
- Page 20 wards. The moveable stop rail (16a) must be fixed far enough in front of the innermost position that the distance between the stop rail (16a) and the saw blade (6) amounts to a minimum of 8 mm. Before making a cut, check that the stop rail (16a) and the saw blade (6) cannot collide. ...
-
Page 21: Transport
7. TRANSPORT Tighten the set screw (10) to lock the rotary table. Press the machine head (4) downwards and secure with the locking bolt (21). Carry the equipment by the fixed saw table. 8. MAINTENANCE Warning! Prior to any adjustment, maintenance or service work, disconnect the mains power plug! General maintenance measures Wipe chips and dust off the machine from time to time using a cloth. -
Page 22: Electrical Connection
10. ELECTRICAL CONNECTION The electrical motor installed is connected and ready for operation. The connection complies with the applicable VDE and DIN provisions. The customer‘s mains connection as well as the extension cable used must also comply with these regulations. ... -
Page 23: Troubleshooting
11. TROUBLESHOOTING PROBLEMS POSSIBLE CAUSES SOLUTIONS The motor does not start 1. Under voltage Check the connections and the 2. Poor connection mains voltage. The motor does not 1. Short circuit in the socket 1. Check the plugs start and disconnects. 2. -
Page 24: Declaration Of Conformity
Phone: +33 (0) 5.34.508.508 Fax: +33 (0)5.34.508.509 Declares that the machinery designated below: MITER SAW Model: EZSO14210 Serial number: 20210736140-20210737139 Complies with the provisions of the Directive “Machinery” 2006/42/EC and national laws transposing it: Also complies with the following European directives:... -
Page 25: Warranty
14. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 26: Product Failure
15. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 27: Warranty Exclusions
16. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...