Table of Contents
Advertisement
Oil tank cap
Oil tank opening
Oil inspection window
WARNING!
• When filling the chain saw with chain oil for the first time, or refilling the tank after it has
been completely emptied, add oil up to the bottom edge of the filler neck. The oil
delivery may otherwise be impaired.
• Never use oil including dust and particles or volatile oil.
• When pruning trees, use botanical oil. Mineral oil may harm trees.
• Never force the chain saw when pruning trees.
• Before cutting out, make sure that the provided oil tank cap is screwed in place.
- Hold the chain saw away from the tree. Start it and wait until lubrication on saw chain is
adequate.
- Bring the tip guide/lower guide into contact with the branch to be cut before switching on.
Cutting without bringing the tip guide/lower guide into contact with the branch may cause the
guide bar to wobble, resulting in injury to operator.
- Saw the wood to be cut by just moving it down.
5.2 PRUNING TREES
WARNING!
• Keep all parts of the body away from the saw chain when the motor is operating.
• Hold the chain saw firmly with both hands when the motor is running.
• Do not overreach. Keep proper footing and balance at all times.
- Bring the lower guide into contact with the branch to be cut before switching on. Cutting without
bringing the lower guide into contact with the branch may cause the guide bar to wobble,
Lower guide
16
Advertisement
Table of Contents
