Related Manuals for Energizer EZ20VELN
Summary of Contents for Energizer EZ20VELN
- Page 1 ORIGINAL INSTRUCTIONS >EN CORDLESS PRUNING SAW EZ20VELN USER GUIDE CAUTION: Read this manual before using this machine!
- Page 2 ©2023 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Builder SAS. All other brand names are trademarks of their respective owners. Neither Builder SAS nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................5 2. YOUR PRODUCT..........................12 3. FUNCTIONAL DESCRIPTION......................12 ASSEMBLY............................13 OPERATION............................15 6. MAINTENANCE AND STORAGE....................18 7. TECHNICAL DETAILS........................21 DISPOSAL............................22 9. DECLARATION OF CONFORMITY....................23 WARRANTY............................24 11. PRODUCT FAILURE.........................25 12. WARRANTY EXCLUSIONS......................26... -
Page 5: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 6 left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Page 7 batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. f)Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
- Page 8 l) Do not attempt to fell a tree until you have an understanding of the risks and how to avoid them. Serious injury could occur to the operator or bystanders while felling a tree. m)This chain saw is not intended for tree felling. Use of the chain saw for operations different than intended could result in serious injury to the operator or bystanders.
- Page 9 3) To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger. 4) Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and there is risk of explosion. 5) Allow a hot battery to cool before charging.
- Page 10 safe way and understand the hazards involved. Children shall not play with the charger. Cleaning and user maintenance of the charger shall not be made by children without adult supervision. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Page 11 the risk of serious or lethal injuries, we recommend that persons with medical implants consult their doctor and the manufacturer of their medical implant before operating the electric tool. 1.8 SYMBOLS This chain-saw is for use by trained tree service operations only. Use without proper WARNING training can result in severe injuries.
-
Page 12: Your Product
2. YOUR PRODUCT 1) Top handle 6) Oil tank cover 11) Switch trigger 2) Battery cartridge 7) Saw chain 12) Chain cover (scabbard) 3) Sprocket cover 8) Knob 13) Carabiner or rope 4) Front hand guard 9) Lock off button attachment point 5) Guide bar 10) Front handle... -
Page 13: Assembly
2) Low voltage battery The remaining battery capacity is too low and the tool will not operate. In this situation, remove and recharge the battery. 3) Switch action WARNING! Before inserting the battery into the tool, always check that the switch trigger actuates properly and returns to the "OFF"... - Page 14 - Remove the sprocket cover. - Remove saw chain and guide bar from the tool. Cutter Guide bar Arrow - Fit in one end of the saw chain on the top of guide bar. - At this time, fit the saw chain as shown in the figure above because it rotates in the direction of arrow.
-
Page 15: Operation
- Turn the knob clockwise to tighten the screw firmly. 4.2 ADJUSTING SAW CHAIN TENSION - Just a slight loosening of the screw allows the saw chain tension to be adjusted. After adjusting, retighten the screw firmly. 5. OPERATION 5.1 LUBRICATION - Saw chain is automatically lubricated when the tool is in operation. - Page 16 Oil tank cap Oil tank opening Oil inspection window WARNING! • When filling the chain saw with chain oil for the first time, or refilling the tank after it has been completely emptied, add oil up to the bottom edge of the filler neck. The oil delivery may otherwise be impaired.
- Page 17 resulting in injury to operator. - When cutting thick branches, first make a shallow undercut and then make the finish cut from the top. - If you try to cut off thick branches from the bottom, the branch may close in and pinch the saw chain in the cut.
-
Page 18: Maintenance And Storage
5.3 CARRYING TOOL Chain cover Battery Always remove the battery cartridge from the tool and overlap the guide bar with the scabbard before carrying the tool. Also cover the battery cartridge with the battery cover. 6. MAINTENANCE & STORAGE 6.1 MAINTENANCE WARNING! •... - Page 19 - The cut is not straight. - Vibration increase. - Fuel consumption has increased. Sharpen the saw chain frequently, but remove only a little material each time. Two or three strokes with a file are usually sufficient for routine resharpening. When the saw chain has been resharpened several times, have it sharpened in a specialist repair shop.
- Page 20 3) Cleaning guide bar Chips and sawdust will build up in the guide bar groove, clogging it and impairing oil flow. Always clean out the chips and sawdust when sharpening or replacing the saw chain. 4) Replacing the sprocket Before fitting a new saw chain, check the condition of the sprocket. Sprocket Locking ring WARNING!
-
Page 21: Technical Details
6.2 STORAGE Clean the tool before storing. Remove any chips and sawdust from the tool after removing the sprocket cover. After cleaning the tool, run it under no load to lubricate the saw chain and guide bar. Cover the guide bar with the scabbard. Remove oil from the oil tank to empty it and place the chain saw with the tank cap facing upward. -
Page 22: Disposal
INFORMATION • The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another. • The declared vibration total value may also be used in a preliminary assessment of exposure. WARNING! •... -
Page 23: Declaration Of Conformity
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product: Cordless PRUNING MACHINE Trade mark: ENERGIZER Model: EZ20VELN Serial number: 20231108078-20231108427 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. -
Page 24: Warranty
10. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 25: Product Failure
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 26: Warranty Exclusions
12. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 27 NOTES...