Table of Contents
Advertisement
6.2 STORAGE
Clean the tool before storing. Remove any chips and sawdust from the tool after removing the
sprocket cover.
After cleaning the tool, run it under no load to lubricate the saw chain and guide bar.
Cover the guide bar with the scabbard.
Remove oil from the oil tank to empty it and place the chain saw with the tank cap facing upward.
6.3 OPTIONAL ACCESSORIES
WARNING!
These accessories or attachments are recommended for use with your tool
specified in this manual. The use of any other accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Service
Center.
• Saw chain
• Guide bar
• Guide bar cover
• File
• Tool bag
WARNING!
If you purchase a guide bar of different length from the standard guide bar, also
purchase a suitable guide bar cover together. It must fit and fully cover the guide bar on the chain
saw.
7. TECHNICAL DATA
Rated voltage
Motor type
Cutting capacity
Chain speed
Oil tank
Unit mass (without guide bar
and chain, empty tanks)
Guide bar type
Chain saw type
Battery type
Charger type
Sound pressure level
Sound power level
Guarantee sound power level
Vibrations Ah
,AG
20V d.c.
Brushless
17.5cm
7m/s
100 ml
2.3kg
AP08-33-507P (8")
3/8LP-33 (8")
Recommendation of battery to use: Model: EZB2A or EZB4A
20V d.c. 2Ah or 4Ah
Recommendation of charger to use: Model: EZCR20V-1
Input 220-240V~ 50/60Hz, 65W
Output 21V d.c., 2.5A
Max. LpA =81.3 dB(A), K= 3 dB(A)
Max. LwA =95.7 dB(A), K= 3 dB(A)
99dB(A)
Max. ah,AG=3 m/s
2
21
, K=1,5 m/s
2
Advertisement
Table of Contents
